Arama Sonuçları..

Toplam 157 kayıt bulundu.
G&H G4™ Nickel Titanium Open Coil Springs - 15mm

G&H G4™ Nickel Titanium Open Coil Springs - 15mm

G4™ Nickel Titanium Open Coil Springs - 15mm   Open coil springs sized in 15mm lengths with inside diameter of .036 designed for opening spaces up to 15mm. Compresses to 3mm.   Package of 10 springs   The unique G4™ Nickel Titanium alloy developed by G&H® is precision formed into closed coil springs. G4™ Springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ NiTi Springs - and also G4™ NiTi Archwires.

http://www.eksenmedikal.com.tr/g-h-g4-nickel-titanium-open-coil-springs-15mm

G&H G4™ Nickel Titanium Open Coil Springs

G&H G4™ Nickel Titanium Open Coil Springs

Open coil springs open and maintain space gently and efficiently in a convenient cut to length design.Choose from (3) 7" straight lengths or (1) 21" SpoolPrecision formed G4™ Nickel Titanium alloy into closed coil springs. G4™ Nickel Titaniam springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ Nickel Titanium. *Forces determined by compressing a 1" open coil spring. Wire Size I.D. Force Compressed 25% (.250") Compressed 50% (.500") .009" .030 Extra Light 95 g 225 g .010" .030 Light 120 g 260 g .010" .036 Medium Light 90 g 200 g .012" .030 Medium 220 g 480 g .012" .036 Medium Heavy 180 g 380 g .014" .030 Heavy 360 g 700 g .014" .036 Extra Heavy 270 g 560 g .010" .045 Facebow 50 g 120 g

http://www.eksenmedikal.com.tr/g-h-g4-nickel-titanium-open-coil-springs

G&H Palatal Arch Bars

G&H Palatal Arch Bars

Our palatal arch bars are formed in .036" stainless with double back bends for arch maintenance, molar rotation and distalization.Pack of 5Pack of 50 Kits5 of each for sizes 34 MM, 36 MM, 38 MM, 40 MM, 46 MM, & 52 MM. 10 of each for sizes 42 MM & 44 MM.

http://www.eksenmedikal.com.tr/g-h-palatal-arch-bars

G&H QUAD-HELIX STRAIGHT

G&H QUAD-HELIX STRAIGHT

        Combining the efficiency of the Quad-Helix appliance with the advantage of easy removal and insertion, allows greater flexibility and control during treatment.To be used with straight retention sheaths.Sold individually.  

http://www.eksenmedikal.com.tr/g-h-quad-helix-straight

GAC Sentalloy® Closed Coil Springs

GAC Sentalloy® Closed Coil Springs

Closing spaces with closed Sentalloy coil springs brings exceptional results.   TWO DESIGNS ARE AVAILABLE: Two Eyelet Design: The initial length is 3mm unactivated (this does not include the eyelet lengths). These can be activated to 15mm without any deformation or change in force. No change in force will be seen as the coil contracts, reducing the space. To engage, slide over a molar hook and slowly stretch to the post on the cuspid bracket or a sliding hook on the archwire. Use a locking Mathieu plier on the widened platform of the eyelet. If you do not use the cuspid post, tie the archwire to the tooth you wish to move, slide on the sliding hook, then tie in the balance of the wire. Now engage the spring as above. For an eyelet with ligature wire, you have the option of hooking the eyelet on the molar, then activating the spring and tying it to the cuspid bracket with the .008” ligature wire. Should you wish to span an area greater than 15mm, measure the span first. Then place the coil on the molar hook and activate the coil 10mm. Tie the ligature wire to the bracket. 

http://www.eksenmedikal.com.tr/gac-sentalloy-closed-coil-springs

GAC Kobayashi Pre-<b class=red>form</b>ed

GAC Kobayashi Pre-formed

Time Saving Hooks No need to remove archwire Made from pliable stainless steel

http://www.eksenmedikal.com.tr/gac-kobayashi-pre-formed


 
3WTURK CMS v6.03WTURK CMS v6.0