Arama Sonuçları..
Toplam 16 kayıt bulundu.
OPAL Nickel Titanium Closed-Coil Springs
Nickel Titanium Closed-Coil Springs
http://www.eksenmedikal.com.tr/nickel-titanium-closed-coil-springs
G&H BONDABLE COIL EYELET
Round base with .036" inside diameter opening.
http://www.eksenmedikal.com.tr/g-h-bondable-coil-eyelet
OPAL Nickel Titanium 15" Spooled Open-Coil Spring
Nickel Titanium 15" Spooled Open-Coil Spring
http://www.eksenmedikal.com.tr/nickel-titanium-15-spooled-open-coil-spring
G&H G4™ Nickel Titanium Closed Coil Springs - 21" Spools
Closed Coil Springs deliver ideal forces for Class II intra-arch maxillary retraction as well as other space closure and maintenance applications. .030” coil diameter - 21” spool The unique G4™ Nickel Titanium alloy developed by G&H® is precision formed into closed coil springs. G4™ Springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ NiTi Springs - and also G4™ NiTi Archwires.
http://www.eksenmedikal.com.tr/g-h-g4-nickel-titanium-closed-coil-springs-21-spools
G&H G4™ Nickel Titanium Closed Coil Springs
G4™ Nickel Titanium Closed Coil Springs The unique G4™ Nickel Titanium alloy developed by G&H® is precision formed into closed coil springs. G4™ Springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ NiTi Springs - and also G4™ NiTi Archwires. Step 1. Use the specially designed Ruler to measure the distance between hooks. (Fig. A) Step 2. Flip the ruler over to view recommended spring for the 150g force range or refer to the Force Chart and select any force level and size spring desired. Step 3. Match the spring size desired to the label on the box and engage spring (Fig. B). Special OfferOrder 12 boxes or more of your choice of springs. Receive a box of measuring gauges, inventory kit box and a laminated force chart at no charge.(12 box minimum)
http://www.eksenmedikal.com.tr/g-h-g4-nickel-titanium-closed-coil-springs
G&H G4™ Nickel Titanium Closed Coil TAD Springs
G4™ Nickel Titanium Closed Coil TAD Springs The unique G4™ Nickel Titanium alloy developed by G&H® is precision formed into closed coil springs. G4™ Springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ NiTi Springs - and also G4™ NiTi Archwires. Step 1. Use the specially designed TAD Ruler to measure the distance between the screw head and the hook. (Fig. A) Step 2. Flip the ruler over to view recommended spring for the 200g force range or refer to the Force Chart and select any force level and size spring desired. Step 3. Match the spring size desired to the label on the box and engage spring (Fig. B). The TAD eyelet is shaped to allow quick and easy engagement without ligation to virtually all TAD Screws. The G&H® design slips over the screw head then snaps in place locking positively on the neck. Special OfferOrder 12 boxes or more of your choice of springs. Receive a box of measuring gauges, inventory kit box and a laminated force chart at no charge.(12 box minimum)
http://www.eksenmedikal.com.tr/g-h-g4-nickel-titanium-closed-coil-tad-springs
G&H G4™ Nickel Titanium Open Coil Springs - 15mm
G4™ Nickel Titanium Open Coil Springs - 15mm Open coil springs sized in 15mm lengths with inside diameter of .036 designed for opening spaces up to 15mm. Compresses to 3mm. Package of 10 springs The unique G4™ Nickel Titanium alloy developed by G&H® is precision formed into closed coil springs. G4™ Springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ NiTi Springs - and also G4™ NiTi Archwires.
http://www.eksenmedikal.com.tr/g-h-g4-nickel-titanium-open-coil-springs-15mm
G&H G4™ Nickel Titanium Open Coil Springs
Open coil springs open and maintain space gently and efficiently in a convenient cut to length design.Choose from (3) 7" straight lengths or (1) 21" SpoolPrecision formed G4™ Nickel Titanium alloy into closed coil springs. G4™ Nickel Titaniam springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ Nickel Titanium. *Forces determined by compressing a 1" open coil spring. Wire Size I.D. Force Compressed 25% (.250") Compressed 50% (.500") .009" .030 Extra Light 95 g 225 g .010" .030 Light 120 g 260 g .010" .036 Medium Light 90 g 200 g .012" .030 Medium 220 g 480 g .012" .036 Medium Heavy 180 g 380 g .014" .030 Heavy 360 g 700 g .014" .036 Extra Heavy 270 g 560 g .010" .045 Facebow 50 g 120 g
http://www.eksenmedikal.com.tr/g-h-g4-nickel-titanium-open-coil-springs
G&H 7" MOLAR DISTALIZING OPEN COIL SPRING .010x.045
Molar Distalizing Open Coil Springs deliver gentle 100 grams of force to achieve average 1mm to 1.5mm distalization per month without patient cooperation. Place over archwire and anchor with stop hook and elastics or Nance Appliance for maximum effectiveness. Intermittent closed coil sections allow for end stops when cut to length. .045" I.D.
http://www.eksenmedikal.com.tr/g-h-7-molar-distalizing-open-coil-spring-010x-045
G&H SPRING, MOLAR DIST. 21" SPOOL
Molar Distalizing Open Coil Springs deliver gentle 100 grams of force to achieve average 1mm to 1.5mm distalization per month without patient cooperation. Place over archwire and anchor with stop hook and elastics or Nance Appliance for maximum effectiveness. Intermittent closed coil sections allow for end stops when cut to length. .045" I.D.
http://www.eksenmedikal.com.tr/g-h-spring-molar-dist-21-spool
G&H SS CLOSED COIL SPR, 010x030
G&H open and closed coil springs are available on 21" spools. No eyelets.
http://www.eksenmedikal.com.tr/g-h-ss-closed-coil-spr-010x030
G&H SS OPEN COIL SPR
G&H open and closed coil springs are available on 21" spools. No eyelets
http://www.eksenmedikal.com.tr/g-h-ss-open-coil-spr
GAC Stop Wound Open Coil Spring
Sentalloy Stop Wound Open Coil Springs are packaged individually or in three 7” lengths to a tube. Each length is quadruple wound every 4mm. After determining the length of coil needed, simply cut the wire at the center of the tight spiral as indicated below: The quadruple wind can be cut by having one person stretch the wind while another person makes the cut; or by using a separating plier to stretch the wind and a hard wire cutter to make the cut. Sentalloy Stop Wound Open Coils with a standard lumen of .035” are available in forces of 50, 100, 150 and 200 grams. (.045” compatible coils are available in 150 grams of force only.)
http://www.eksenmedikal.com.tr/stop-wound-open-coil-spring
GAC Open Coil Spring
Open, or compression, coils are 15mm in length when passive and may be compressed to 3mm. Between these points, the coil will exert 50 (extra light), 100 (light), 150 (medium), 200 (heavy), or 250 (extra heavy) , and 300 (XX Heavy) grams of force until 14mm, and then the force falls to 0 as it becomes passive again. No distortion will occur during movement. These low forces limit patient discomfort and ensure good circulation in the periodontal pocket during movement. Typically, you will see 4mm of space opened in three months (this varies depending on the age and health of the patient). To engage the open coils, mark the archwire where the mesial and distal tooth destinations are located. Crimp on the mesial stop and ligate the archwire up to the point where the spring is to be placed. Slide the coil over the archwire and crimp on the distal stops. Ligate the balance of the wire. Since the Sentalloy coil needs about 1/10 as much wire as steel, good hygiene is much easier, but do advise the patient to rinse and brush around the coil. No other adjustment is needed.
http://www.eksenmedikal.com.tr/open-coil-spring
GAC Molar Distallization Coils
Maxillary molars can be moved distally in 4-7 months without patient cooperation using our 100 gram Stop Wound Open Coil Springs. A modified Nance or A.C.C.O. may be used as an anchorage device initially. The coils are placed between the 1st bicuspid and the 1st molar – by passing the 2nd bicuspid. The coils are then activated against the molar using an archwire lock or our special crimpable stop. Cut the Stop Wound Open Coils so that they extend to the end of the buccal tube. Ligate the archwire to the 1st bicuspid, set the stop, then slide the coil onto the archwire. Next, feed the archwire into the tube, ensuring that the archwire is fully inserted with 2mm of wire extending beyond the tube. Uprighting springs may be used from the 1st bicuspid to the distal of the laterals to control any anterior movement. Using this system, you will see 1mm per month in space gained, with any anchorage loss well within clinically acceptable limits.
http://www.eksenmedikal.com.tr/gac-molar-distallization-coils
GAC Sentalloy® Closed Coil Springs
Closing spaces with closed Sentalloy coil springs brings exceptional results. TWO DESIGNS ARE AVAILABLE: Two Eyelet Design: The initial length is 3mm unactivated (this does not include the eyelet lengths). These can be activated to 15mm without any deformation or change in force. No change in force will be seen as the coil contracts, reducing the space. To engage, slide over a molar hook and slowly stretch to the post on the cuspid bracket or a sliding hook on the archwire. Use a locking Mathieu plier on the widened platform of the eyelet. If you do not use the cuspid post, tie the archwire to the tooth you wish to move, slide on the sliding hook, then tie in the balance of the wire. Now engage the spring as above. For an eyelet with ligature wire, you have the option of hooking the eyelet on the molar, then activating the spring and tying it to the cuspid bracket with the .008” ligature wire. Should you wish to span an area greater than 15mm, measure the span first. Then place the coil on the molar hook and activate the coil 10mm. Tie the ligature wire to the bracket.
http://www.eksenmedikal.com.tr/gac-sentalloy-closed-coil-springs