Arama Sonuçları..

Toplam 16 kayıt bulundu.

In-Ovation C - Esthetics without Compromise

In-Ovation C - Esthetics without Compromise

The In-Ovation C self-ligating bracket is made from ceramic material that compares to the strength and performance of metal.  A highly esthetic self-ligating bracket made from a special ceramic material with a rhodium processed clip for enhanced esthetics. The natural color of In-Ovation C makes the bracket a perfect fit for patients concerned about esthetics, while delivering functionality comparable to metal brackets.   THE POWER OF INTERACTIVE™ CONTROL FROM START TO FINISH In-Ovation C provides you with the ability to start and effectively finish your treatment in one, simple system. Using the technique of your choice, In-Ovation C enables you to maintain the precise degree of control that you need for each phase of your patient’s treatment. In-Ovation C’s revolutionary Interactive™ technology means you can choose the degree of engagement between the bracket and wire. In-Ovation C can be passive for leveling and aligning, expressive where control is realized and free-sliding is maintained, or active for controlled, optimal finishing. The choice is yours – a benefit not found in “passive only” brackets. INTERACTIVE CONTROL Passive Phase – Small, round wires slide freely, initiating the tooth movement process as the archwire gently levels the teeth and coaxes them into alignment. Expressive Phase – Square or rectangular wires are gently seated into the base of the slot without contacting the clip. Programming is expressed, rotations are corrected and space closures are completed. Active Phase – Rectangular archwires extend beyond the slot to fully engage the clip, providing the active control necessary for functional finishing, uprighting of the roots and adjusting the torque.   Practice Advantages In-Ovation C provides a great way to optimize your practice and expand treatment options. Studies consistently show that self-ligating brackets significantly lower frictional forces; offer faster, easier archwire changes; increase appointment intervals; and shorten patient treatment time. In-Ovation C is easy for doctors and staff to use. Designed for reliable performance, the bracket’s 100% mechanical lock base ensures reliable bonding, debonding and the ability to rebond. A specially designed interactive, Coballoy spring clip provides excellent    Patient Advantages Superb esthetics provide the confidence your patients will love Less chairtime during visits Longer intervals between appointments Excellent results Improved oral hygiene   The Art of Orthodontic Excellence Transluscent Ceramic Construction In-Ovation C brackets are manufactured from a high-tech ceramic that combines excellent translucency with strength and performance similar to that of steel. Reliable Mechanical Bonding In-Ovation C employs a proprietary process to form strong, undercut bonding nubs on the bottom of the bracket base. These provide excellent anchoring points for the adhesive, resulting in a bond that is 100% mechanical and debonds easily after treatment. Straight Wire Technology A true straight wire appliance is one in which all the brackets have been designed to guide teeth into their desired positions with a preformed wire. In-Ovation is a true straight wire appliance that features: Compound Contour Base Torque in the Base Programmed In-Out Control Level Slot Alignment True Twin Design Occlusal and gingival twin tie wings offer an optimal mesial, distal span for achieving superior rotation control. The elimination of the elastomeric ligatures increases your inter-bracket distance. Spring Clip The self-ligating clip extends fully through a vertical channel in the bracket body, enhancing the structural integrity of the clip. A unique rhodium treatment process provides a low-sheen surface for reduced visibility and enhanced aesthetics.   Easy Opening and Closing The clip opens easily when pressure is applied occlusally to the gingival sphere using the Engage-C.  This is the primary method for opening and closing the clip is the gingival sphere. If unable to access the gingival sphere you can also utilize the Opin notch on the facial surface of the clip applying gentle pressure occulsally with amini scaler. The clip can be closed with aninstrument or simple finger pressure  on the incisal curve.   Triple Chamfered Slot Walls Slot walls are beveled outward, facilitating wire engagement and reducing the chance of the archwire binding or crimping. Disto–Gingival Dimple A color-code on the disto-gingival tie wing provides immediate identification of the tooth for which the bracket is intended. A matching colored removable site gauge is also in the slot for position orientation. Smooth Swept Tie Wings Smooth, swept tie wings help to reduce occlusal interference while increasing patient comfort. Adequate undercuts allow easy anchoring for elastic chains or the fastening of color ties at the patient’s request.    

http://www.eksenmedikal.com.tr/in-ovation-c-esthetics-without-compromise

In-Ovation® R - The Original

In-Ovation® R - The Original

In-Ovation R has been recognized as an industry leader for over a decade. Thousands of clinicians worldwide have trusted In-Ovation to treat their patients. The precision and quality built into these brackets offers repeatable success, practice efficiencies and beautiful results every time. See how far In-Ovation R can take you, your patients and your practice.   In-Ovation Means Interactive In-Ovation R provides you with the ability to start and effectively finish your treatment with one, simple system. Using the technique of your choice, In-Ovation R enables you to maintain the precise degree of control that you need for each phase of your patient’s treatment. In-Ovation R’s unique Interactive technology means you can choose the degree of engagement between the bracket and wire. It can be passive for leveling and aligning, expressive where control is realized and free-sliding is maintained, or active for controlled, optimal finishing. Passive Phase   Expressive Phase   Active Phase Small, round wires slide freely, initiating the tooth movement process as the archwire gently levels the teeth and coaxes them into alignment.   Square or rectangular wires are gently seated into the base of the slot without contacting the clip. Programming is expressed, rotations are corrected and space closures are completed.   Rectangular archwires extend beyond the slot to fully engage the clip, providing the active control necessary for functional finishing, uprighting of the roots and adjusting the torque.   Practice Advantages Not all self-ligating brackets are created equal. In-Ovation R brackets were created to optimize the treatment process with precision engineering and true straight wire design. The In-Ovation orthodontic systems are the result of a keen understanding of human physiology and orthodontic engineering. The compound contoured base of the In-Ovation R bracket is designed to provide a precise anatomical fit across the enamel surface of the tooth. The smooth swept tie-wings are engineered to minimize occlusal interference in order to increase patient comfort. In addition, the chamfered archwire slot is designed to reduce chair time by facilitating wire engagement and reducing the chance of archwire binding or crimping. This dedication to quality and attention to detail is infused into every product that carries the In-Ovation name. Patient Advantages Today more than ever, patients are doing their part to better understand the options available to them. Savvy practices have come to recognize this as an opportunity, enabling you to offer the benefits of self-ligation as an adjunct to your talent, technique and reputation. In providing a self-ligating option, you’ll be able to offer your patients less chair time, fewer appointments and a cleaner, more esthetic appearance. In doing so, you’ll be able to create a perceived (and potentially significant) point of differentiation between your practice and the other competing practices in the area.   In-Ovation R Dedication to Detail True Twin Design – Occlusal and gingival twin tie-wings offer an optimal mesial, distal span for achieving superior rotation control. The elimination of the elastomeric ligatures increase your inter-bracket distance. Spring Clip – The self-ligating clip extends fully through the vertical channel in the bracket body, enhancing the structural integrity of the clip. Base Design – The exclusive patented Palmer Notation laser etched into the mesh facilitates bracket management with a ready reference of the quadrant, tooth and prescription.An 80 gauge single mesh, compound contoured base provides a precise anatomical fit.  Full Slot Slip Coverage – The In-Ovation R clip provides full coverage across the entire slot for superior rotational control. This allows the clip to interact with the wire both on the mesial and distal, as needed, without the need for auxiliaries. Straight Wire Technology In-Ovation is a completely adjusted true straight wire appliance system that positions teeth at all four dimensions: in/out, angulations, torque, and overcorrection. With this completely adjusted four dimensional appliance system you will need no offset bends in the archwires to obtain an optimal finish in most cases (if the brackets are optimally positioned on teeth). In order to be considered a completely four-dimensional appliance, the bracket must contain: Compound contour base Torque in base Proper in/out and anti-rotation Level slot alignment at the conclusion of appliance therapy Easy Open Clip – The clip opens easily when pressure is applied occlusally to the v-notched clip at the gingival side of the bracket, using the engage R or similar instrument. The clip can be closed with an instrument or simple finger pressure on the incisal curve. Triple Chamfered Slot Walls – Slot walls are beveled outward, facilitating wire engagement and reducing the chance of the archwire binding or crimping. Vertical Scribe Line – A scribe line on the bracket face aids positioning by providing a convenient reference for orienting the center line of the bracket with the facial axis of the clinical crown (FACC). Smooth Swept Tie-Wings –Help to reduce occlusal interference while increasing patient comfort. Adequate undercuts allow easy anchoring for elastic chains or the fastening of color ties at the patient’s request.

http://www.eksenmedikal.com.tr/in-ovation-r-the-original

678-110 Ligature Cutter

678-110 Ligature Cutter

Ligature cutter with reduced tip dimension. Designed to cut soft wire pins and ligature wires up to .012" (.30 mm). Closed

http://www.eksenmedikal.com.tr/678-110


G&amp;H G4™ Nickel Titanium <b class=red>Closed</b> Coil Springs - 21&quot; Spools

G&H G4™ Nickel Titanium Closed Coil Springs - 21" Spools

Closed Coil Springs deliver ideal forces for Class II intra-arch maxillary retraction as well as other space closure and maintenance applications.   .030” coil diameter - 21” spool   The unique G4™ Nickel Titanium alloy developed by G&H® is precision formed into closed coil springs. G4™ Springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ NiTi Springs - and also G4™ NiTi Archwires.

http://www.eksenmedikal.com.tr/g-h-g4-nickel-titanium-closed-coil-springs-21-spools

G&amp;H G4™ Nickel Titanium <b class=red>Closed</b> Coil Springs

G&H G4™ Nickel Titanium Closed Coil Springs

        G4™ Nickel Titanium Closed Coil Springs   The unique G4™ Nickel Titanium alloy developed by G&H® is precision formed into closed coil springs. G4™ Springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ NiTi Springs - and also G4™ NiTi Archwires.   Step 1. Use the specially designed Ruler to measure the distance between hooks. (Fig. A)   Step 2. Flip the ruler over to view recommended spring for the 150g force range or refer to the Force Chart and select any force level and size spring desired.   Step 3. Match the spring size desired to the label on the box and engage spring (Fig. B).   Special OfferOrder 12 boxes or more of your choice of springs. Receive a box of measuring gauges, inventory kit box and a laminated force chart at no charge.(12 box minimum)

http://www.eksenmedikal.com.tr/g-h-g4-nickel-titanium-closed-coil-springs

G&amp;H G4™ Nickel Titanium <b class=red>Closed</b> Coil TAD Springs

G&H G4™ Nickel Titanium Closed Coil TAD Springs

        G4™ Nickel Titanium Closed Coil TAD Springs   The unique G4™ Nickel Titanium alloy developed by G&H® is precision formed into closed coil springs. G4™ Springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ NiTi Springs - and also G4™ NiTi Archwires.   Step 1. Use the specially designed TAD Ruler to measure the distance between the screw head and the hook. (Fig. A)   Step 2. Flip the ruler over to view recommended spring for the 200g force range or refer to the Force Chart and select any force level and size spring desired.   Step 3. Match the spring size desired to the label on the box and engage spring (Fig. B).   The TAD eyelet is shaped to allow quick and easy engagement without ligation to virtually all TAD Screws. The G&H® design slips over the screw head then snaps in place locking positively on the neck.   Special OfferOrder 12 boxes or more of your choice of springs. Receive a box of measuring gauges, inventory kit box and a laminated force chart at no charge.(12 box minimum)

http://www.eksenmedikal.com.tr/g-h-g4-nickel-titanium-closed-coil-tad-springs

G&amp;H G4™ Nickel Titanium Open Coil Springs - 15mm

G&H G4™ Nickel Titanium Open Coil Springs - 15mm

G4™ Nickel Titanium Open Coil Springs - 15mm   Open coil springs sized in 15mm lengths with inside diameter of .036 designed for opening spaces up to 15mm. Compresses to 3mm.   Package of 10 springs   The unique G4™ Nickel Titanium alloy developed by G&H® is precision formed into closed coil springs. G4™ Springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ NiTi Springs - and also G4™ NiTi Archwires.

http://www.eksenmedikal.com.tr/g-h-g4-nickel-titanium-open-coil-springs-15mm

G&amp;H G4™ Nickel Titanium Open Coil Springs

G&H G4™ Nickel Titanium Open Coil Springs

Open coil springs open and maintain space gently and efficiently in a convenient cut to length design.Choose from (3) 7" straight lengths or (1) 21" SpoolPrecision formed G4™ Nickel Titanium alloy into closed coil springs. G4™ Nickel Titaniam springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ Nickel Titanium. *Forces determined by compressing a 1" open coil spring. Wire Size I.D. Force Compressed 25% (.250") Compressed 50% (.500") .009" .030 Extra Light 95 g 225 g .010" .030 Light 120 g 260 g .010" .036 Medium Light 90 g 200 g .012" .030 Medium 220 g 480 g .012" .036 Medium Heavy 180 g 380 g .014" .030 Heavy 360 g 700 g .014" .036 Extra Heavy 270 g 560 g .010" .045 Facebow 50 g 120 g

http://www.eksenmedikal.com.tr/g-h-g4-nickel-titanium-open-coil-springs

G&amp;H 7&quot; MOLAR DISTALIZING OPEN COIL SPRING .010x.045

G&H 7" MOLAR DISTALIZING OPEN COIL SPRING .010x.045

Molar Distalizing Open Coil Springs deliver gentle 100 grams of force to achieve average 1mm to 1.5mm distalization per month without patient cooperation. Place over archwire and anchor with stop hook and elastics or Nance Appliance for maximum effectiveness. Intermittent closed coil sections allow for end stops when cut to length. .045" I.D.

http://www.eksenmedikal.com.tr/g-h-7-molar-distalizing-open-coil-spring-010x-045

G&amp;H SPRING, MOLAR DIST. 21&quot; SPOOL

G&H SPRING, MOLAR DIST. 21" SPOOL

Molar Distalizing Open Coil Springs deliver gentle 100 grams of force to achieve average 1mm to 1.5mm distalization per month without patient cooperation. Place over archwire and anchor with stop hook and elastics or Nance Appliance for maximum effectiveness. Intermittent closed coil sections allow for end stops when cut to length. .045" I.D.  

http://www.eksenmedikal.com.tr/g-h-spring-molar-dist-21-spool

G&amp;H SS <b class=red>CLOSED</b> COIL SPR, 010x030

G&H SS CLOSED COIL SPR, 010x030

G&H open and closed coil springs are available on 21" spools. No eyelets.

http://www.eksenmedikal.com.tr/g-h-ss-closed-coil-spr-010x030

G&amp;H SS OPEN COIL SPR

G&H SS OPEN COIL SPR

G&H open and closed coil springs are available on 21" spools. No eyelets

http://www.eksenmedikal.com.tr/g-h-ss-open-coil-spr

G&amp;H BOND-A-BRAID™ LINGUAL RETAINER 10PK

G&H BOND-A-BRAID™ LINGUAL RETAINER 10PK

Permanent retention is greatly enhanced using a flattened, dead soft 8-braided wire. Intra-arch splinting with this thin ribbon arch prevents torque control problems that can occur using a round braided wire for these procedures.When bonded on the lingual of the upper incisors, a very thin rectangular wire can be adapted with little lower incisor interference.The dead soft wire is easy to adapt and prevents inadvertent tooth movement associated with active force wires.Bond-A-Braid is excellent for semi-permanent orthodontic splinting of the upper or lower incisors. It can be used to hold diastemas closed, maintain difficult extraction sites and solving various other tooth-splinting dilemmas.Excellent for splinting periodontally comprised teeth.(10) 6" lengths

http://www.eksenmedikal.com.tr/bond-a-braid-lingual-retainer-10pk

GAC Sentalloy® <b class=red>Closed</b> Coil Springs

GAC Sentalloy® Closed Coil Springs

Closing spaces with closed Sentalloy coil springs brings exceptional results.   TWO DESIGNS ARE AVAILABLE: Two Eyelet Design: The initial length is 3mm unactivated (this does not include the eyelet lengths). These can be activated to 15mm without any deformation or change in force. No change in force will be seen as the coil contracts, reducing the space. To engage, slide over a molar hook and slowly stretch to the post on the cuspid bracket or a sliding hook on the archwire. Use a locking Mathieu plier on the widened platform of the eyelet. If you do not use the cuspid post, tie the archwire to the tooth you wish to move, slide on the sliding hook, then tie in the balance of the wire. Now engage the spring as above. For an eyelet with ligature wire, you have the option of hooking the eyelet on the molar, then activating the spring and tying it to the cuspid bracket with the .008” ligature wire. Should you wish to span an area greater than 15mm, measure the span first. Then place the coil on the molar hook and activate the coil 10mm. Tie the ligature wire to the bracket. 

http://www.eksenmedikal.com.tr/gac-sentalloy-closed-coil-springs

 
3WTURK CMS v6.03WTURK CMS v6.0