678-113 Slim Flush Cut Distal End Cutter

SLIM FLUSH CUT AND HOLD DISTAL END CUTTER

678-506 Distal Cinch Back İnstrument

DISTAL CINCH BACK HAND INSTRUMENT   Bends archwire distal to the 1st or 2nd molar; maxium wire size .021"x.025" (.53 mm x 64 mm).

678-101 Distal End Cutter

UNIVERSAL CUT AND HOLD DISTAL END CUTTER

678-210 Seperating Pliers

FORCE MODULE SEPARATING PLIERS     Used for placement of elastic separators.

678-219 Bracket Removing Pliers

STRAIGHT BRACKET REMOVING PLIERS   Works well for steel, ceramic and plastic brackets of all types.

678-212 Bracket holder

DIRECT BOND BRACKET HOLDER TWEEZERS

BioForce

BioForce - Square or Rectangluar   Optimally biological forces begin at approximately 80 grams of force at the anteriors, and gradually increase to approximately 300 grams of force in the molars. Also available with IONGUARD. Optimal Tooth Movement and Ideal Biological Forces As this chart shows, the optimal force needed to move anteriors is not the same as the optimal force needed to move molars. If a force is designed to move anteriors, it is too light to move molars. If a force is great enough to move molars, the force is too strong - traumatically strong - for anteriors. Other wires offer one force at a time, requiring at least two or three wire changes to achieve the desired movement. BioForce exhibits low forces at the anterior, gradually increases force in the bicuspids, and again in the molars. Each tooth receives the optimal biological force necessary to move specific teeth in one wire. Anterior Region of arch form has the lowest heat-activated force, as anterior teeth have the lightest roots. The Bicuspid Region of the arch maintains a slightly greater heat-activated force to move larger rooted bicuspids. The Posterior Region of the arch form has the greatest heat-activated force within the archwire for moving thestrong-rooted molars. BioForce also shares the properties of all Sentalloy wires and is designed to deliver a gentle, light continuous force to mitigate periodontal stress. UNIQUE PROPERTIES OF SENTALLOY SUPERELASTIC WIRES Body Heat Activation At room temperature, Sentalloy wires are soft, pliable, and easy to engage. Once warmed to body temperature the wire gently and predictably guides the teeth to the present arch form. Superelasticity Even when severely malposed, Sentalloy continues to exert its gentle, near constant forces as the tooth moves. Shape Memory Effect Sentalloy will take displacements up to 90 degrees without deforming. Its overwhelming desire to return to its original shape actually promotes tooth movement with fewer 0wire changes and fewer patient visits. IONGUARD - IONGUARD is not a coating; it is a fundamental change in the wire’s surface. Without changing the wire’s dimensions, or altering any of the wire’s unique superelastic properties, the process produces sliding mechanics comparable to stainless steel, while sealing the occlusal surface to reduce nickel leaching and breakage.

CAPlant & SMS

Diversity - Optimized in mid-palate- Diverse functions in the buccal- 3-way slot for various wiring- 3-D teeth movement and multi-anchor effect with a single mini-implantSimplicity & Stability- Easy insertion and removal of wires- Rigid wire-anchor fastening by cap and tapered slot fixture headHygiene & Comfort- NO-RESIN fastening- Minimizes contamination and foreign body sensation   SMS High force loadingEasy wire engaging and elastomerSliding mechanics applicable         

678-212M Tweezers

SLIM DIRECT BOND BRACKET HOLDER TWEEZERS   50% slimmer at tip as compared to 678-212.

E-521 Micro-Mini Pin and Ligature Cutter TC

OPAL Crimpable Ball Hook

Precision manufactured split crimpable ball hooks offer reliable performance during treatment when elastics or extension springs are needed. Also provides an effective alternative to preposted arch wires. The ball hook may be crimped without removing the arch wire. Ball hook is straight and measures 5mm from base to ball. The straight hook may be bent in any direction. Fits round and rectangular wire sizes up to .021ʺ x .028ʺ.

OPAL Crimpable Split Stop Strips

Offering convenient, secure stops that can be placed anywhere along the arch wire, crimpable split stops limit tooth movement and maintain proper wire positioning. Made of 304 annealed stainless steel, split stops crimp easily, yet hold firmly to the arch wire. Ten stops are provided on each strip. Fits round and rectangular sizes up to .021ʺ x .028ʺ.

NK-217 Ligature Cutter

  Provided with 7°cutting angle for easy access.  

NK-212 DİSTAL END CUTTER

It shear cuts hard and braided wire and then, holds the ends of the wire safely, so that it does not enter the soft tissue. The cutting edges are diamond honed.

ACR

Aesthetics Compact & Simple- Minimizes root and bone damage- Aesthetic satisfaction from small exposure in the oral cavity Comfort Safe & Accurate- Easy, safe and accurate insertion- Decreases contamination and foreign body sensation in the oral cavity with low/simple plateau head Reliability Slim but Strong- Slim body with high torsional resistance- Precisely machined- Sharp but strong drill-free end CAUTION 1.2 mm mini-implants are not recommended below the attached gingiva/mucosa junction.     ACR(H) / ACR(S) ACR(H) ACR(S)

NK-121 “V” Bend Stop Plier

Special design for making 1 mm “V” bends to shorten archwires or provide a positive stop. Ideal for placing stops in Nitanium wires. For round or rectangular wires up to .019” x .025”.

G&H COMPOSITE EYELETS

The eyelet bracket is composed of a popular high strength techno-polymer material. It features a funnel entry system for easy wire introduction and a low profile shape which provides optimal patient comfort.   Often used in place of regular brackets for crowded areas.Opening will accommodate wires up to .021x.025".   Package of 5

678-321 V-Stop Pliers

V-STOP PLIERS

G&H G4™ Nickel Titanium Closed Coil Springs - 21" Spools

Closed Coil Springs deliver ideal forces for Class II intra-arch maxillary retraction as well as other space closure and maintenance applications.   .030” coil diameter - 21” spool   The unique G4™ Nickel Titanium alloy developed by G&H® is precision formed into closed coil springs. G4™ Springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ NiTi Springs - and also G4™ NiTi Archwires.

G&H G4™ Nickel Titanium Open Coil Springs

Open coil springs open and maintain space gently and efficiently in a convenient cut to length design.Choose from (3) 7" straight lengths or (1) 21" SpoolPrecision formed G4™ Nickel Titanium alloy into closed coil springs. G4™ Nickel Titaniam springs provide consistent force and remain active until the space is closed. Consistent force values and full recovery are both routinely achieved with G4™ Nickel Titanium. *Forces determined by compressing a 1" open coil spring. Wire Size I.D. Force Compressed 25% (.250") Compressed 50% (.500") .009" .030 Extra Light 95 g 225 g .010" .030 Light 120 g 260 g .010" .036 Medium Light 90 g 200 g .012" .030 Medium 220 g 480 g .012" .036 Medium Heavy 180 g 380 g .014" .030 Heavy 360 g 700 g .014" .036 Extra Heavy 270 g 560 g .010" .045 Facebow 50 g 120 g

G&H SPRING, MOLAR DIST. 21" SPOOL

Molar Distalizing Open Coil Springs deliver gentle 100 grams of force to achieve average 1mm to 1.5mm distalization per month without patient cooperation. Place over archwire and anchor with stop hook and elastics or Nance Appliance for maximum effectiveness. Intermittent closed coil sections allow for end stops when cut to length. .045" I.D.  

G&H SS CLOSED COIL SPR, 010x030

G&H open and closed coil springs are available on 21" spools. No eyelets.

G&H SS OPEN COIL SPR

G&H open and closed coil springs are available on 21" spools. No eyelets